как ломануть 1C 8.3 for Linux

[Kolhoznic]

в /etc/udev/rules.d есть правила для HASP?
что там?

после замены на Sentinel_LDK_Ubuntu_DEB_Run-time_Installer.tar.gz

# HASP rules
ACTION=="add|change|bind", SUBSYSTEM=="usb", ATTRS{idVendor}=="0529", ATTRS{idProduct}=="0001", MODE="664", ENV{HASP}="1", SYMLINK+="aks/hasp/%k", RUN+="/usr/sbin/aksusbd_x86_64 -c $root/aks/hasp/$kernel"
ACTION=="remove", ENV{HASP}=="1", RUN+="/usr/sbin/aksusbd_x86_64 -r $root/aks/hasp/$kernel"

# SENTINEL rules
ACTION=="add|change|bind", SUBSYSTEM=="usb", ATTRS{idVendor}=="0529", ATTRS{idProduct}=="0003", KERNEL!="hiddev*", MODE="666", GROUP="plugdev", ENV{SENTINELHID}="1", SYMLINK+="aks/sentinelhid/%k"


Ошибки в syslog пропали

May 17 08:38:02 srv-keys kernel: [ 507.678282] usb_vhci_hcd usb_vhci_hcd.2: USB Virtual Host Controller Interface -- Version 1.15 (2019-05-14)
May 17 08:38:02 srv-keys kernel: [ 507.678286] usb_vhci_hcd usb_vhci_hcd.2: --> Backend: USB VHCI user-mode IOCTL-interface
May 17 08:38:02 srv-keys kernel: [ 507.678291] usb_vhci_hcd usb_vhci_hcd.2: VHCI Host Controller
May 17 08:38:02 srv-keys kernel: [ 507.678300] usb_vhci_hcd usb_vhci_hcd.2: new USB bus registered, assigned bus number 5
May 17 08:38:02 srv-keys kernel: [ 507.678416] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
May 17 08:38:02 srv-keys kernel: [ 507.678419] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 17 08:38:02 srv-keys kernel: [ 507.678421] usb usb5: Product: VHCI Host Controller
May 17 08:38:02 srv-keys kernel: [ 507.678423] usb usb5: Manufacturer: Linux 4.9.0-9-amd64 usb_vhci_hcd
May 17 08:38:02 srv-keys kernel: [ 507.678424] usb usb5: SerialNumber: usb_vhci_hcd.2
May 17 08:38:02 srv-keys kernel: [ 507.678841] hub 5-0:1.0: USB hub found
May 17 08:38:02 srv-keys kernel: [ 507.678853] hub 5-0:1.0: 1 port detected
May 17 08:38:02 srv-keys kernel: [ 507.679033] usb_vhci_iocifc: Usb bus #5
May 17 08:38:03 srv-keys usbhasp[658]: Port 1 is powered on -> connecting device.
May 17 08:38:03 srv-keys usbhasp[658]: Port 1 connected.
May 17 08:38:03 srv-keys usbhasp[658]: Port 1 is disabled.
May 17 08:38:03 srv-keys kernel: [ 508.004731] usb 5-1: new full-speed USB device number 2 using usb_vhci_hcd
May 17 08:38:03 srv-keys usbhasp[658]: Set device on port 1 address = 2
May 17 08:38:03 srv-keys kernel: [ 508.145772] usb 5-1: New USB device found, idVendor=0529, idProduct=0001
May 17 08:38:03 srv-keys kernel: [ 508.145777] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 17 08:38:03 srv-keys kernel: [ 508.145779] usb 5-1: Manufacturer: HASP HL 3.25
May 17 08:38:03 srv-keys aksusbd_x86_64: aksusbd_usb_dev_connect: device '/dev/aks/hasp/5-1'
May 17 08:38:03 srv-keys kernel: [ 508.145772] usb 5-1: New USB device found, idVendor=0529, idProduct=0001
May 17 08:38:03 srv-keys kernel: [ 508.145777] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 17 08:38:03 srv-keys kernel: [ 508.145779] usb 5-1: Manufacturer: HASP HL 3.25
May 17 08:38:03 srv-keys aksusbd_x86_64: aksusbd_usb_dev_connect: device '/dev/aks/hasp/5-1'

Но теперь LM не виден в сети. Подскажите где настройки файл настройки LMа?
И где посмотреть подключился ли ключ к демону. systemctl status выдает

systemctl status aksusbd

● aksusbd.service - Sentinel LDK Runtime Environment (aksusbd daemon)
Loaded: loaded (/etc/systemd/system/aksusbd.service; enabled; vendor preset: enabled)
Active: active (running) since Fri 2019-05-17 08:36:26 MSK; 17min ago
Process: 623 ExecStart=/usr/sbin/aksusbd (code=exited, status=0/SUCCESS)
Main PID: 624 (aksusbd)
Tasks: 3 (limit: 4915)
CGroup: /system.slice/aksusbd.service
└─624 /usr/sbin/aksusbd

systemd[1]: Starting Sentinel LDK Runtime Environment (aksusbd daemon)...
aksusbd[624]: loaded, daemon version: 7.90.1.81737, key API (USB) version: 3.88 (parallel driver not available)
systemd[1]: Started Sentinel LDK Runtime Environment (aksusbd daemon).

systemctl status hasplmd
● hasplmd.service - Sentinel LDK Runtime Environment (hasplmd daemon)
Loaded: loaded (/etc/systemd/system/hasplmd.service; enabled; vendor preset: enabled)
Active: active (running) since Fri 2019-05-17 08:36:26 MSK; 19min ago
Process: 627 ExecStart=/usr/sbin/hasplmd -s (code=exited, status=0/SUCCESS)
Main PID: 628 (hasplmd)
Tasks: 6 (limit: 4915)
CGroup: /system.slice/hasplmd.service
└─628 /usr/sbin/hasplmd -s

systemd[1]: Starting Sentinel LDK Runtime Environment (hasplmd daemon)...
srv-keys hasplmd[628]: HASP LM v22.0.1.84151 loaded
srv-keys systemd[1]: Started Sentinel LDK Runtime Environment (hasplmd daemon).