как ломануть 1C 8.3 for Linux

[kalk]

Кто нибудь пробовал скомпилировать и запустить эмулятор на Centos 8?
У меня вроде получилось собрать из исходников для centos 7, но сервер 1с все равно не видит ключи.

[morvlad]

Добрый день!
Установил 1C x64 сервер на CentOS 7 x64
Работу с ключами настроил по инструкции, все работает, но только с физическим ключом, в данном случае с клиентским.
Проблема возникает когда загружаю дампы ключей .json
Есть ошибки, если кто сталкивался с подобной проблемой подскажите пожалуйста.

Конфигурация:
Клиент 1C установлен на рабочей станции, на сервере 1C стоит физический ключ, система его находит - все работает замечательно.
Ключ отключаю и загружаю дампы переделанные в формат json - не работает.

linux: CentOS Linux release 7.7.1908 (Core)
Ядро: 3.10.0-1062.1.2.el7.x86_64
1C: 1C_Enterprise83-server-8.3.15-1565.x86_64 и другие пакеты

rpm -qa|grep hasp
haspd-modules-7.90-eter2centos.x86_64
haspd-7.90-eter2centos.x86_64

lsmod |grep usb
usb_vhci_iocifc *******17536 *0 *
usb_vhci_hcd **********19494 *1 usb_vhci_iocifc

netstat -anp | grep hasp
tcp *******0 *****0 0.0.0.0:1947 ***********0.0.0.0:* **************LISTEN *****31717/hasplmd ********
udp *******0 *****0 0.0.0.0:475 ************0.0.0.0:* **************************31699/hasplm *********
udp *******0 *****0 0.0.0.0:1947 ***********0.0.0.0:* **************************31717/hasplmd ********
udp *******0 *****0 127.0.0.1:2790 *********0.0.0.0:* **************************31682/winehasp *******
udp *******0 *****0 0.0.0.0:45039 **********0.0.0.0:* **************************31717/hasplmd **

netstat -anp | grep aks
unix *2 *****[ ACC ] ****STREAM ****LISTENING ****427525 **31663/aksusbd *******/tmp/.aksusb *
unix *3 *****[ ] ********STREAM ****CONNECTED ****428075 **31663/aksusbd *******/tmp/.aksusb *
unix *2 *****[ ] ********DGRAM *******************427516 **31663/aksusbd *

Старт ключей:

usbhasp key1.json key2.json 
usbhasp[17100]: Loaded key 0: '1С:Предприятие 8.0; Лицензия на сервер приложений', Created: 01/01/2005 00:00
usbhasp[17100]: Loaded key 1: 'v8 500 user', Created: 21/04/2005 14:59 *
usbhasp[17100]: USB device created usb_vhci_hcd.0 (bus# 5) *
usbhasp[17100]: Port 1 is powered on -> connecting device. **
usbhasp[17100]: Port 1 connected. *
usbhasp[17100]: Port 2 is powered on -> connecting device. **
usbhasp[17100]: Port 2 connected. *
usbhasp[17100]: Port 1 is disabled. *
usbhasp[17100]: Set device on port 1 address = 2 *
usbhasp[17100]: Port 2 is disabled. *
usbhasp[17100]: Set device on port 2 address = 3 

Сразу появляется: 

	
	
/proc/bus/usb/005 
001 *002 *003
Здесь уже видно что-то не так: 

	
	
usbhasp status
usbhasp[958]: Error No such file or directory loading keyfile status.
usbhasp[958]: No keys loaded. Nothing to emulate.
Логи /var/log/messages после старта ключа 
[CODE
Oct 15 14:23:14 test usbhasp[23874]: Loaded key 0: '1С:Предприятие 8.0; Лицензия на сервер приложений', Created: 01/01/2005 00:00
Oct 15 14:23:14 test usbhasp[23874]: Loaded key 1: 'v8 500 user', Created: 21/04/2005 14:59 *
Oct 15 14:23:14 test kernel: usb_vhci_hcd usb_vhci_hcd.0: USB Virtual Host Controller Interface -- Version 1.15 (2019-10-10) *
Oct 15 14:23:14 test kernel: usb_vhci_hcd usb_vhci_hcd.0: --> Backend: USB VHCI user-mode IOCTL-interface *
Oct 15 14:23:14 test kernel: usb_vhci_hcd usb_vhci_hcd.0: VHCI Host Controller *
Oct 15 14:23:14 test kernel: usb_vhci_hcd usb_vhci_hcd.0: new USB bus registered, assigned bus number 5 *
Oct 15 14:23:14 test kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 3.10 *
Oct 15 14:23:14 test kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 *
Oct 15 14:23:14 test kernel: usb usb5: Product: VHCI Host Controller *
Oct 15 14:23:14 test kernel: usb usb5: Manufacturer: Linux 3.10.0-1062.1.2.el7.x86_64 usb_vhci_hcd *
Oct 15 14:23:14 test kernel: usb usb5: SerialNumber: usb_vhci_hcd.0 *
Oct 15 14:23:14 test kernel: hub 5-0:1.0: USB hub found *
Oct 15 14:23:14 test kernel: hub 5-0:1.0: 2 ports detected *
Oct 15 14:23:14 test kernel: usb_vhci_iocifc: Usb bus #5 *
Oct 15 14:23:14 test usbhasp[23874]: USB device created usb_vhci_hcd.0 (bus# 5) *
Oct 15 14:23:14 test usbhasp[23874]: Port 1 is powered on -> connecting device. *
Oct 15 14:23:14 test usbhasp[23874]: Port 1 connected. *
Oct 15 14:23:14 test usbhasp[23874]: Port 2 is powered on -> connecting device. *
Oct 15 14:23:14 test usbhasp[23874]: Port 2 connected. *
Oct 15 14:23:15 test usbhasp[23874]: Port 1 is disabled. *
Oct 15 14:23:15 test kernel: usb 5-1: new full-speed USB device number 2 using usb_vhci_hcd *
Oct 15 14:23:15 test usbhasp[23874]: Set device on port 1 address = 2 *
Oct 15 14:23:15 test kernel: usb 5-1: New USB device found, idVendor=0529, idProduct=0001, bcdDevice= 3.25 *
Oct 15 14:23:15 test kernel: usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 *
Oct 15 14:23:15 test kernel: usb 5-1: Manufacturer: HASP HL 3.25 *
Oct 15 14:23:15 test aksusbd: aksusbd_usb_dev_connect: device '/dev/aks/hasp/5-1' *
Oct 15 14:23:15 test aksusbd[31663]: aksusbd_req_dev_connect: write() failed: -1, Bad file descriptor *
Oct 15 14:23:15 test usbhasp[23874]: Port 2 is disabled. *
Oct 15 14:23:15 test kernel: usb 5-2: new full-speed USB device number 3 using usb_vhci_hcd *
Oct 15 14:23:15 test usbhasp[23874]: Set device on port 2 address = 3 *
Oct 15 14:23:15 test kernel: usb 5-2: New USB device found, idVendor=0529, idProduct=0001, bcdDevice= 3.25 *
Oct 15 14:23:15 test kernel: usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 *
Oct 15 14:23:15 test kernel: usb 5-2: Manufacturer: HASP HL 3.25 *
Oct 15 14:23:15 test aksusbd: aksusbd_usb_dev_connect: device '/dev/aks/hasp/5-2' *
Oct 15 14:23:15 test aksusbd[31663]: aksusbd_req_dev_connect: write() failed: -1, Bad file descripto

Логи dmesg

usb_vhci_hcd usb_vhci_hcd.0: USB Virtual Host Controller Interface -- Version 1.15 (2019-10-10) *
[411905.148267] usb_vhci_hcd usb_vhci_hcd.0: --> Backend: USB VHCI user-mode IOCTL-interface *
[411905.148273] usb_vhci_hcd usb_vhci_hcd.0: VHCI Host Controller *
[411905.148475] usb_vhci_hcd usb_vhci_hcd.0: new USB bus registered, assigned bus number 5 *
[411905.148572] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 3.10 *
[411905.148578] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 *
[411905.148582] usb usb5: Product: VHCI Host Controller *
[411905.148587] usb usb5: Manufacturer: Linux 3.10.0-1062.1.2.el7.x86_64 usb_vhci_hcd *
[411905.148591] usb usb5: SerialNumber: usb_vhci_hcd.0 *
[411905.148996] hub 5-0:1.0: USB hub found *
[411905.149012] hub 5-0:1.0: 2 ports detected *
[411905.149183] usb_vhci_iocifc: Usb bus #5 *
[411905.460968] usb 5-1: new full-speed USB device number 2 using usb_vhci_hcd *
[411905.585052] usb 5-1: New USB device found, idVendor=0529, idProduct=0001, bcdDevice= 3.25 *
[411905.585062] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 *
[411905.585068] usb 5-1: Manufacturer: HASP HL 3.25 *
[411905.698921] usb 5-2: new full-speed USB device number 3 using usb_vhci_hcd *
[411905.823112] usb 5-2: New USB device found, idVendor=0529, idProduct=0001, bcdDevice= 3.25 *
[411905.823120] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 *
[411905.823124] usb 5-2: Manufacturer: HASP HL 3.25